Matest – CPM Instruments

A075N Los Angeles Machine

Admin — Tue, 20 Jul 2021 09:46:38 +0000

Used to determine the resistance of aggregates to abrasion. It comprises a heavy steel cylinder of 711 mm inside diameter x 508 mm inside length, mounted on a base frame. The cylinder rotates at a speed of between 31 and 33 rpm. The machine is fitted with an automatic digital counter which can be preset to the required number of revolutions of the drum.

The cylinder is counterbalanced so that the filling opening stays in position without tilting; a push-button allows to position such opening for the loading/unloading operations.

Supplied without abrasive charges to be ordered separately according to the requested Standards. It cannot be sold in the CE markets without protection (see accessories).

Power supply: 230 V 50 Hz 1ph 750W Dimensions: 1000x800x1000 mm Weight: 370 Kg approx.

La entrada A075N Los Angeles Machine se publicó primero en CPM Instruments.

A059-01KIT Electromagnetic sieve shakers

Admin — Tue, 20 Jul 2021 09:44:50 +0000

These Sieve Shakers are activated by electromagnetic impulses and thanks to the triple vibrating action (vertical, lateral and rotational) they are recommended to perform sieving tests where high precision and performance are important, and where continual and intense uses are required. Therefore they are suggested for accurate sieving tests, on fine materials too. These Electromagnetic Shakers are of simple and sturdy construction, they can hold up to 10 sieves and are also suitable for wet sieving tests (accessory mod. A046, A047). Power supply: 230V 50Hz 1ph 450/750W MAIN FEATURES

Triple vibrating action: vertical, lateral and rotational
Digital microprocessor control panel can adjust: timer 0-999 minutes; vibration intensity; continuous or intermittent vibrating action; pause between vibrations (indicated for fine material sieving)
The control panel can be wall fixed or placed on a bench

Multiple models available:

A059-01 KIT: dimensions sieves Ø 200 mm – 8″; 320x380x850 mm; weight 40 Kg approx.
A059-02 KIT: dimensions sieves Ø 200-250-300-315 mm – 8″-12″; 380x440x1080 mm; weight 65 kg approx.
A059-03 KIT: dimensions sieves Ø 200-250-300-315-350-400 mm – 8″-12″; 430x460x1150 mm; weight 80 kg approx.
A059-04 KIT: dimension sieves Ø 200-250-300-315-400-450 mm – 8″-12″-18″; 480x500x1150 mm; weight 85 Kg approx.

La entrada A059-01KIT Electromagnetic sieve shakers se publicó primero en CPM Instruments.

A052 Woven Wire Mesh Sieves

Admin — Tue, 20 Jul 2021 09:43:34 +0000

All sieves are made with stainless steel woven wire and frame and meet International Specifications. The sieves are available in the following diameters: 200 – 250 – 300 – 315 – 400 – 450 mm and 8”-12”. The available openings of the woven wire mesh sieves are coded from n° 00 to 77 and listed in this table.

The buyer has to add to this number:

A052-… for the frame Ø 200 mm
A051-… for the frame Ø 250 mm
A053-… for the frame Ø 300 mm
A054-… for the frame Ø 315 mm
A055-… for the frame Ø 400 mm
A050-… for the frame Ø 8”
A043-… for the frame Ø 12”

NOTE: it is possible to test approx. 1000 g. of material by using Ø 200 mm sieves and 3000 g. with Ø 300 mm sieves.

La entrada A052 Woven Wire Mesh Sieves se publicó primero en CPM Instruments.

V075-20 Platform balance 60kg x 2g

Admin — Tue, 20 Jul 2021 09:41:49 +0000

Platform balance having the following technical specifications:

Capacity: 60 kg

Readability: 2 gPan dimensions: 450×600

Power supply: rechargeable batteries and also 230V 1ph 50-60Hz

La entrada V075-20 Platform balance 60kg x 2g se publicó primero en CPM Instruments.

V071-10 Digital balance 2200g x 0.01g

Admin — Tue, 20 Jul 2021 09:39:24 +0000

Digital balance having the following technical specifications:

Capacity: 2200 g

Readability: 0.01 g

RS 232 port

Pan dimensions: Ø 160
Under balance weighting facility for specific gravity tests

Power supply only 230V 1ph 50-60Hz

La entrada V071-10 Digital balance 2200g x 0.01g se publicó primero en CPM Instruments.

V072-06N Top digital balance 15 kg x 0.1g

Admin — Tue, 20 Jul 2021 09:36:54 +0000

Digital balance having the following technical specifications:

Capacity: 15 kg

Readability: 0.1 g

RS 232 port

Pan dimensions: 320×210
Under balance weighting facility for specific gravity tests

Power supply: rechargeable batteries and also 230V 1ph 50-60Hz

La entrada V072-06N Top digital balance 15 kg x 0.1g se publicó primero en CPM Instruments.

S088 Proctor penetrometer

Admin — Tue, 20 Jul 2021 09:33:51 +0000

Used to determine in field the moisture-penetration resistance relationship of fine grained soils. Spring load scale 0-55 Kg, subdiv. 1 Kg, with direct max. value reading in Kg. on the sliding rod. Complete with 9 interchangeable stainless steel needles Ø 4.52 – 5.23 – 6.40 – 9.07 – 12.83 – 16.54 – 20.22 – 24.79 – 28.55 mm, accessories, carrying case. Chromed finishing.

Weight: 5 Kg approx.

La entrada S088 Proctor penetrometer se publicó primero en CPM Instruments.

S050 Lightweight dynamic penetrometer

Admin — Tue, 20 Jul 2021 09:32:21 +0000

Used to establish the thickness of different strata, when testing compaction works and to determine the relative density of fills and naturally deposited non-cohesive soils. In general if the ground is not too compact, penetration tests can be carried of about 8 to 12 metres. The penetrometer set, huosed in carrying case, consists of:

10 Kg. drop rammer, 500 mm. fall and anvil
11 sounding rod Ø 22 mm.x 1 m lenght complete with threaded collar and guiding rod
Grooved rod to extract samples
2 drive point 90°, 5 cm2 and 10 cm2 surface
Lifting device for sounding rod, accessories

Dimensions: 1080x360x220 mm Weight: 72 Kg approx

La entrada S050 Lightweight dynamic penetrometer se publicó primero en CPM Instruments.

V065-02 Analytical Balances

Admin — Tue, 20 Jul 2021 09:30:56 +0000

Analytical balances are used for very accurate weightings and for heat of hydration cement tests. Two available models:

V065-02 Capacity 250 g, Readability 0.1 mg
V065-03 Capacity 220 g, Readability 0.1 mg

Tolerance: +/- 0.2 mg Outer keyboard with direct reading on a wide LCD display. Data interface: RS 232 Single pan dia. 80 mm Tare range: by subtraction up to full capacity. Dust proof plexiglass cover. Power supply: 230V 50/60Hz 1ph Dimensions: 315x225x330 mm Weight : 10 kg approx.

La entrada V065-02 Analytical Balances se publicó primero en CPM Instruments.

V065-02 Analytical Balances

Admin — Tue, 20 Jul 2021 09:24:54 +0000

Analytical balances are used for very accurate weightings and for heat of hydration cement tests. Two available models:

V065-02 Capacity 250 g, Readability 0.1 mg
V065-03 Capacity 220 g, Readability 0.1 mg

La entrada V065-02 Analytical Balances se publicó primero en CPM Instruments.

S051 Dynamic cone penetrometer (DCP)

Admin — Tue, 20 Jul 2021 09:23:22 +0000

Dynamic cone penetrometer (DCP) TRL = TRANSPORT RESEARCH LABORATORY, UK.

This portable hand operated equipment is designed to obtain a direct and rapid in-situ evaluation of the structural strength of road pavement layers constructed with unbound materials. The DPC Penetrometer results can be compared and interpreted with CBR (California Bearing Ratio) as per sperimental Kleyn 1982 studies. The test is performed with continuous penetrations at approx. 800 mm depth with max. depth of 2 m by using extension rods. The equipment consists of:

Drop sliding hammer 8 kg weight, falling height of 575 mm
Impact anvil with driving rod
Penetration rod with conical 60° point and Ø 20 mm.
Bar wrench, spanners, accessories.

Dimensions (in case): 1210x340x190 mm approx. Weight: 29 kg approx.

La entrada S051 Dynamic cone penetrometer (DCP) se publicó primero en CPM Instruments.

276-01 AUTO SHEARLAB

Admin — Tue, 20 Jul 2021 09:21:27 +0000

Shear Testing Machine, with Data Acquisition System DATA ACQUISITION VERSION – AUTO SHEARLAB

Digital Shear Testing Machine, with incorporated Data Acquisition System and Basic Firmware, comprising:

S276-10 Shear Frame with digital “Touch-Screen” microprocessor, complete with beam loading device, shear box case with adaptors, transducers supports.

S277-20 Load Cell, electric, 3000N capacity, complete with cable.

S336-11 Linear vertical transducer, 10 mm travel.

S336-12 Linear horizontal transducer, 25 mm travel.

S277-31 Firmware activating 3 connectors for basic data acquisition.

S273 KIT Set of 50 kg of slotted weights.

NOTE: Shear box, hollow punch, tamper and Software are not included and have to be ordered separately.

La entrada 276-01 AUTO SHEARLAB se publicó primero en CPM Instruments.