DGSI – CPM Instruments https://www.cpm-instruments.com Web Principal Fri, 10 Dec 2021 19:46:59 +0000 es hourly 1 https://wordpress.org/?v=5.7.5 https://www.cpm-instruments.com/wp-content/uploads/2019/05/favicon-100x100.png DGSI – CPM Instruments https://www.cpm-instruments.com 32 32 Extensómetro digital “Slope Indicator” https://www.cpm-instruments.com/producto/extensometro-digital-slope-indicator/ Fri, 05 Nov 2021 04:33:42 +0000 https://www.cpm-instruments.com/?post_type=product&p=1588 Aplicaciones El extensómetro de cinta se utiliza para determinar cambios en la distancia entre pares de puntos de referencia. Las aplicaciones típicas incluyen: • Supervisión de la convergencia del túnel paredes. • Seguimiento de deformaciones en aberturas subterráneas. • Monitoreo del desplazamiento de muros de contención, soportes de puentes y otras estructuras de hormigón Ficha […]

La entrada Extensómetro digital “Slope Indicator” se publicó primero en CPM Instruments.

]]> Aplicaciones

El extensómetro de cinta se utiliza para determinar cambios en la distancia entre pares de puntos de referencia.

Las aplicaciones típicas incluyen:
• Supervisión de la convergencia del túnel paredes.
• Seguimiento de deformaciones en aberturas subterráneas.
• Monitoreo del desplazamiento de muros de contención, soportes de puentes y otras estructuras de hormigón

Ficha técnica

La entrada Extensómetro digital “Slope Indicator” se publicó primero en CPM Instruments.

]]> Extensómetro digital https://www.cpm-instruments.com/producto/extensometro-digital/ Fri, 16 Jul 2021 06:17:08 +0000 https://www.cpm-instruments.com/?post_type=product&p=1156 The digital tape extensometer is used to detect and monitor changes in the distance between two reference points. Typical applications include:

  • Monitoring convergence of tunnel walls.
  • Monitoring deformations in underground openings.
  • Monitoring displacement of retaining structures, bridge supports, and other structures.

La entrada Extensómetro digital se publicó primero en CPM Instruments.

]]> The digital tape extensometer is used to detect and monitor changes in the distance between two reference points. Typical applications include:

  • Monitoring convergence of tunnel walls.
  • Monitoring deformations in underground openings.
  • Monitoring displacement of retaining structures, bridge supports, and other structures.

Operation

Stainless steel reference points are permanently installed at measurement stations along the tunnel or structure. To obtain a measurement, the operator stretches the tape between two reference points, hooking the free end of the tape to one point and the instrument body to the other. The operator tensions the tape by turning a knurled collar until two index marks are aligned and then notes the reading from the tape and the digital display. The sum of these readings is the distance between the two reference points. By comparing the current reading to the initial reading, the operator can calculate the change in distance between the two reference points.

La entrada Extensómetro digital se publicó primero en CPM Instruments.

]]>